SecurityMan PIR-SD Instrukcja Użytkownika Pobierz pdf (Strona 20)

Cancelling PIR-SD Remote from the Alarm Host

Step1: Press PRGM/SET + Password (system default 888)+ENT+71

+ENT+00+ENT to cancel.

NOTE: Please reference the Air-Alarm series user’s manual as needed.

Adding PIR-SD Motion Detection to Alarm Host

Make sure the host is “DIS-ARMED” and press:

Step 1: PRGM/SET + Password (default is 888) + ENT+ 70 + ENT + XX

+ ENT [Input zones 11~15 for XX indicating the 2nd defense line

dedicated for PIR sensors]

(The “ /Learn” light will appear solid blue/red)

Step 2: Provoke the motion sensor on the PIR-SD 2 consecutive times

to add.

Cancelling PIR-SD Motion Detection from Alarm Host

Make sure the host is “DIS-ARMED” and press:

PRGM/SET + Password (default is 888) + ENT+ 71 + ENT + XX + ENT

[Input zones 11~15 for XX indicating the zone number that the PIR-SD

is paired to and using code 71 to remove the PIR-SD will remove any

sensor that was paired to that zone.]

(The “ /Learn” light will appear solid blue/red)

The alarm host will beep twice, and the “ /Learn” light will ash once

to indicate the PIR-SD is successfully cancelled from the Alarm Host.

Enabling Video Recording

Please follow steps 1-2 to enable the PIR-SD to start recording when ever

your alarm system is triggered.

Step 1: Press the “Study” button on the back of the PIR-SD

(PIR-SD will beep once).

Step 2: On the Alarm Host Press: ESC + Password (default is 888) +

ENT + ESC + Password (default is 888) + ENT. At this time

1 2 ... 15 16 17 18 19 20 21 22 23

Brak uwag

SecurityMan PIR-SD Instrukcja Użytkownika Strona 20